How to fix iPhone stuck in Apple logo

How to fix iPhone stuck in Apple logo | iPhone 5/5s/6/6s/7 won’t turn off.

Lot of iOS users may experience the iPhone get stuck while loading apple logo, in fact, according to the search engine’s report how to fix iPhone stuck in Apple logo? Stands first while analyzing the search terms related to the problem facing in iPhone 5/5s/6/6s/7. If you are one among those victims and seeking a better solution to fix iPhone stuck in Apple logo, then this article would be the useful resource to find the best and apt solutions.

Whenever you experience your iPhone stuck on white apple screen and or iPhone stuck on apple logo won’t turn off don’t get panic. It’s not at all a typical task; in fact, it can be fixed without any difficulties. In literal, it could be the main cause of the ill-functioning software. Below listed any of the 4 solutions could easily help you to fix iPhone stuck in Apple logo.

Restarting Your iPhone

How to fix iPhone stuck in Apple logo

Well, it might be the simplest and easiest method to resolve that problem. All you need to do is to simply hold the ON/OFF button for few seconds and to slide to power off option in the screen. On most occasions, it will resolve your iPhone logo struck a problem.

Using Recovery Mode

By using iTunes users can able to make use of Recovery mode to fix iPhone stuck in Apple logo. In fact, by doing to so, users can able to do a factory reset and to get the latest iOS version. When compared with the normal restart option, using recovery mode will do the wonder more often.

More Apple problem solutions Guide

Using DFU Mode

Well, the term DFU refers (Device Firmware Update) which helps your device to communicate with the iTunes without initiating the boot loader functions.

Steps Involved in DFU mode to resolve the problem of your iPhone stuck on white apple screen and or iPhone stuck on apple logo won’t turn off:

  • Launch iTunes and connect your phone with a computer, followed that turns off your phone and hold the power button for a few seconds.
  • Now restart your phone by pressing the home button for a few seconds along with the power button for around 10 to 12 seconds and leave the power button. (Note: For iPhone 7/7 plus instead of home button make use of the volume down button).

iPhone stuck on apple logo won't turn off

  • Now your screen supposed to remain black else you need to repeat the above mentioned steps again.
  • After that you can witness the pop-up window which promotes you with the option of restoring your device or to do factory settings.

Using Tenorshare Reiboot

Well the tool Tenorshare Reiboot is specially designed to fix all the iOS issues which also include solutions for iPhone stuck on white apple screen and or iPhone stuck on apple logo won’t turn off. All you need to do follow the below listed simple steps.

  • Download the Tenorshare Reiboot and connect your iPhone
  • Followed by selecting the exit recovery mode that helps you to solve most of the problems you are facing on your mobile.

I hope above mentioned points will help to fix your iPhone related issues. Let me know for any queries.

fix a broken iPhone charger cord

How to fix a broken iPhone charger cord | iPhone 5/5s/6/6s/7.

Apple iPhone and iPad devices come with non-removable batteries but this is not a problem considering the fact that batteries in those devices last really long. But many die-hard Apple Inc. fans complain that iPhone and iPad chargers aren’t so good in terms of build quality. Constant plugging and unplugging, twisting, bending, travel damage etc. decrease the life of charger cords considerably and sometimes, these charging cords damage quickly than expected. It is always better to fix a broken iPhone charger cord than buying an expensive charger cable from the Apple store.

How to fix a broken iPhone charger cord | iPhone 5/5s/6/6s/7.

Frankly, it is really easy to fix an iPhone charging cord that won’t charge and those who don’t have any prior experience can also easily do it. But first one needs to check whether the problem lies with charging cord or within the iPhone or iPad. If the problem lies within the iPad or iPhone, then don’t mess up with iPhone/iPad charging cord. If your charging cord is not working or broke right at the base of the plug, follow these steps to fix a broken iPhone/iPad charger cord.

READ: Some more amazing stuffs about latest technology.

How to fix a broken iPhone charger cord?

  • One needs to be very careful while repairing charging cord as a small error will turn it into garbage. You need a knife, scissor, heat shrink tube and electrical tape to fix a broken iPhone charger cord.
  • Use knife to separate the outer casing of the connecting plug. Be careful while doing so and don’t cut any copper wires or anything inside.
  • Cut the cord and you can see small copper wires wrapped in foil. For an inch or so, remove the foil and now, you will have fully exposed copper wires to work with.
  • This is the crucial step in fixing a broken iPhone charger cord that won’t charge. Slide the heat shrinking tube on to the charging cord and twist together the corresponding wires.

How to fix a broken iPhone charger cord | iPhone 5/5s/6/6s/7.

  • Wrap the electric tape on each and every pairing. After that, wrap the electric tube over the entire grouping and slide the heat shrink over the worked area.
  • Use butane lighter or something similar to shrink the tubing. Be careful and don’t heat the charger cord too much.
  • The repaired iPhone charging cord may not look as original but this repaired one works same as that of original iPhone/iPad charger.
  • You can use this method to repair iPhone 5/6/7 charging USB cable that is not working. Repair after seeing DIY tutorials only.

It is always better to fix a broken iPhone charger cord immediately after your observe any damage. Also, don’t misinterpret signs of wear and tear as damage.

Fix Safari cannot open the page because too many redirects occurred.

Fix Safari cannot open the page because too many redirects occurred.

Safari is one of the most popular web browsers and those who are using Apple Inc. products prefer this one over other web browsers. Safari web browser is not only user friendly but also easy to customize. Safari web browser is not available for Android and Windows mobile OS users and one must own an iPhone or iPad to browse web content using Safari. Most of the times, iPhone users won’t face any problem while using this awesome web browser but some users reported that Safari cannot open the page because too many redirects occurred error irritates them so much. Here are some easy ways to fix this problem.

Fix Safari cannot open the page because too many redirects occurred.

Disable unwanted extensions: Some extensions force Safari browser to automatically redirect to other web pages. So, it is always better to think twice before installing any extension and if you don’t trust the source, avoid installing the add-on or extension to safari browser. Deleting the unwanted extensions and disabling the unnecessary add-ons will surely fix iPhone safari redirect problem in most of the cases.

Update to latest iOS: Whenever update is available, it is better to update your iPhone to latest iOS as this prevents unnecessary errors. Note that iPhones that are running on previous version of iOS are more vulnerable to risks and malicious attacks compared to the updated iPhones. Also, some die-hard iPhone users reported that updating iPhone automatically fixes some of the irritating errors and every iPhone user must update to latest iOS whenever possible.

Check Homepage Settings: For some reason, if home page settings in safari browser were corrupted, then your favorite browser might act unexpectedly. If safari is unable to open website in iphone 5s/6/6s/7 or Safari cannot open the page because too many redirects occurred, check whether safari home page settings are accurate or not.

Fix Safari cannot open the page because too many redirects occurred.

iPhone runs low on memory: Unlike other smart phones, iPhone users can’t expand storage of their smart phones through SD card. They have to adjust with the limited memory available and if iPhone runs low on memory, this may also lead to some errors while using Safari. It is always better to have at least 2GB of free space if you want your iPhone and Safari to work smoothly without any lag.

Ask Queries on Apple Forum also

Debug Console: If you don’t know the problem that is causing the error, use debug console feature to fix Safari cannot open the page because too many redirects occurred error. Follow this path: Tap on Settings >> Safari >> Developer >> Debug Console. By default, Debug Console will be OFF and turn it ON by confirming the same. Go back to the safari browser, open a webpage and the debug console will give you information about errors.

Fix iPhone stuck in headphone mode

How to Fix iPhone stuck in headphone mode water damage.

Fix iPhone stuck in headphone mode: iPhone stuck in headphone mode is one of the most common problems faced by iPhone users. For some reason, if you are facing this, try these simple tricks to fix iPhone stuck in headphone mode error. These tricks will solve the irritating problem most of the times and works well with iPhone 5/5s/6/6s/7 stuck in headphone mode. First of all, you must know the problem that is causing this error and solve accordingly.

fix iPhone stuck in headphone mode

How to Fix iPhone stuck in headphone mode water damage:

Check Audio Mode: If the headphones are plugged in, remove it and press volume up/down button. If the volume increases/decreases and if you see the word “Headphones” in alert, then try to fix the problem by changing to Ringer mode. Press the volume up/down repeatedly and turn ON the speaker mode. Keep the volume to maximum and this will fix error in some cases.

Restart/Factory Reset your iPhone: After getting in contact with water, some settings might have corrupted. To solve this, restart your iPhone 5/5s/6/6s/7 that stuck in headphone mode and you can do this by constantly pressing sleep/wake button. If the problem still persists, try factory reset to fix iPhone stuck in headphone mode problem. Before choosing this method, backup your contacts and other important files. Factory Reset will erase all the data including images, videos, contacts etc. and follow this path Settings > General > Reset > Erase All Content and Settings. This procedure will automatically restart your iPhone and the problem will be solved in most of the cases.

iPhone 5/5s/6/6s/7 stuck in headphone mode

Debris in headphone jack: Small debris in headphone jack will also cause this error by making your iPhone believe that headphones are plugged in. Blowing compressed air into the headphone jack will clear debris and this may fix error in some cases. Even if headphone jack is physically damaged also, this problem will arise. If some liquid spills in or water damage led to iPhone stuck in headphone mode error, then you need to get your iPhone repaired at authorized service center. If water damage is the reason for this error, also check whether iPhone speakers are working or not.

Ask someone to call: Ask your friends or family members to call you and talk to them for five to six minutes in speaker mode. Switch ON and OFF speaker mode at least two to three times during the call. While finishing your call, make sure that you are talking in speaker mode and hang up. This will fix iPhone stuck in headphone mode problem in some cases.

Visit Apple forum for further clarification.

If all the above methods fail, don’t try your own hand in repairing iPhone as it can cause more damage. If water damage led to iPhone stuck in headphone mode error, it is better to opt for authorized service center. Please tell us if you are still facing such issues in your iPhone.